Semi-automatic. Up to 3 melting points can be quickly and accurately determined simultaneously. With microprocessor heating over control. The ramp starting temperature of the approximate melting range can be input via the keyboard. The units quickly heat up to this temperature and give an optical and acoustic signal once it has been reached. By the operators pressing another key, the devices begin to heat up at a constant rate (fixed at 1 °C / min). Up to 4 melting points can be recorded and transferred to the memory as discreet temperatures for later recall on the display. The different phases of a melt or the critical melting temperatures of various samples can be investigated under the same conditions in this way. The initial temperature and heating rate can be set via the keyboard in order that various test protocols are available. An accessory printer enables documentation of the results, date, time (real time) and sample number. The 8 x magnifier has a Ø of 40 mm and an adjustable focal point. Units comply with VDE requirements.
- Half automatic.
- Digital temperature control LCD-display in increments of 0.1 °C.
- 3 sample can be quickly and accurately determined simultaneously.
- Optical and acoustic signal once it has been reached.
45 to 400 °C
|Accuracy:||± 0.5 °C (at 50 °C), ± 1 °C (at 350 °C)|
|Resolution:||± 0.1 °C|
|Display:||LCD, 4 digit, height 12 mm|
|Dimensions (W x D x H):||200 x 350 x 85 mm|
|Capillary:||Ø 2.0 mm, one end closed|
Ø 1.5 mm, both ends closed
|Oven output:||18 W|
|Input:||220 / 240 V|