+44 (0) 1904 488 599

Welcome, I’m Alex Davis. Yorlab prides itself on its professional but personal approach to customer service and we are committed to ensuring that we can meet all of your laboratory needs – just give us a call on 01904 488599 or 0191 526 0897

Alex Davis, Managing DirectorAlex Davis, Managing Director

Water Baths

Types 1002, 1003, 1004, 1005, 1008, 1012 und 1013:
For incubations and inactivations of cultures.

Type 1005 is suitable specially for warming up medical compressing and hot packs.
  • Microprocessor-controlled temperature regulation.
  • Short heating-up times.
  • Temperature display and setting digitally via LED display, in 0.1 °C increments. Temperature constancy ± 0.1 °C temporal at 50 °C.
  • Temperature range from approx. 5 °C above ambient temperature to 99.9 °C, after installation of a water level regulator 1919 (accessory) from approx. 3 °C above tap water temperature to 99.9 °C.
  • Electronic monitoring of the temperature regulator. In case of failure, the cause of the fault is shown on the display.
  • Electronic over-temperature cut-out, 4 °C above set temperature and electro-mechanical > 130 °C.
  • Soft-touch keys with clear symbols. Two-finger operation prevents unintentional alterations of the set value.
  • Interior (bath interior and heating element, cover frame, lid and perforated floor) made of st. steel. Standard equipment: lid and perforated floor. Water bath 1005 is supplied without perforated floor if the rack for hot packs 1923 (accessory) is ordered.
  • Cover frame and lid have mirror finish. Lift-up, insulating lid with inner camber, no dripping back of condensate into the tubes.
  • Corrosion-resistant outer housing, made of electrolytically galvanised sheet steel, powder-coated. Drain cock at the back.
  • Mains supply: 230 V / 50 to 60 Hz.

Types 1012 and 1013:
The circulation system of type 1012 and 1013 ensures optimum temperature uniformity throughout the whole bath. An electric motor with rotary magnet is flanged to the bath floor. Its torque is transmitted to a PTFE coated stirring magnet in the bath. The stirring magnet forces the water into the centre of the bath and then evenly back again.
Water Baths  GFL
TypeInside dimension
(W x D x H)
Outside dimensions
(W x D x H)
PUOrder No. Price/Unit/GBP 
1002245 x 200 x 145340 x 395 x 255710009.015905902-846.89Order
1003400 x 245 x 145500 x 440 x 25514150012.515905903-955.09Order
1004600 x 245 x 145700 x 440 x 25521150016.715905904-1,085.14Order
1005410 x 296 x 315510 x 490 x 44540150020.715905905-1,206.86Order
1008400 x 245 x 205500 x 440 x 32520150014.715905908-1,010.23Order
1012245 x 200 x 145340 x 395 x 3257100010.615905912-1,057.05Order
1013400 x 245 x 145500 x 440 x 32514150014.615905913-1,214.15Order
Further voltages are available on request.
Racks for water bath type 1002 to 1013 / 1102 to 1113 / GFL
ProAquaTop Water Bath Protection Agent for water baths 1102 to 1113 and shaking water baths 1083 to 1092 and 1070 / GFL
Alternate products:
The new generation in water baths / GFL