+44 (0) 1904 488 599

Welcome, I’m Alex Davis. Yorlab prides itself on its professional but personal approach to customer service and we are committed to ensuring that we can meet all of your laboratory needs – just give us a call on 01904 488599 or 0191 526 0897

Alex Davis, Managing DirectorAlex Davis, Managing Director

CO2 Incubators INCOmed

Classified as class IIa medical device. Equipment of basic model:
  • Temperature range from + 20 °C (however, min. 8 °C above ambient temperature) up to + 50 °C.
  • Spatial temperature deviation < ± 0.3 °C at 37 °C.
  • Temperature fluctuations with time acc. to DIN 12880:2007-05 ± 0.1 °C.
  • Working chamber st. steel 1.4301 (ASTM 304) deep-drawn.
  • Housing textured st. steel, rear zinc-plated steel.
  • Inner glass door and outer heated st. steel door.
  • Mains supply 230 V, 50 / 60 Hz.
  • 2 perforated st. steel shelves come with size 108, 3 perforated st. steel shelves with sizes 153 and 246.
  • Acc. to DIN 12880:2007-05, with CE-mark.
  • Adaptive, fuzzy-supported multifunctional digital PID-microprocessor controller.
  • Integrated fault diagnostic system for temperature, CO2 as well as humidity limit control.
  • 2 Pt100 sensors DIN class A in 4-wire-circuit monitoring each other and taking over the performance at the same temperature value.
  • CO2- supply via sterile filter.
  • Digital electronic CO2 control with automatic zeroing (infrared measuring system), ranging from 0 to 10 %, setting accuracy 0.1 %, barometric pressure compensation.
  • Interruption of CO2-supply upon door opening.
  • Integrated humidity limit control (88 to 97 %) with digital display of relative humidity, setting accuracy 1 %.
  • Digital real-time / weekly programme timer with day group function, precise minute setting.
  • Digital display of all parameters such as temperature, weekday, time, CO2, humidity and set-up values. Language to be chosen via set-up.
  • Resolution of setpoint and actual values: 0.1 °C.
  • Chip-card as STERICard to sterilise the working chamber, fixed cycle (4 h / 160 °C) without removing any sensors or mountings.
  • Works calibration certificate at 37 °C included.
Multiple overtemperature protection:
  • With audible and visual alarm on over- / under-temperature, over-CO2 and empty gas cylinder, open door, under-humidity and empty water tank (with optional humidity module), open door and empty gas cylinder.
  • Independently working, digital electronic overtemperature controller TWW, protection class 3.1.
  • Additionally integrated Automatic Safety Function 'ASF' for over- and undertemperature automatically following the setpoint value at a freely selectable tolerance range.
  • Mechanical temperature limiter TB protection class 1 to switch off heating at about 10 °C above max. oven temperature.
Memmert  CO2 Incubators INCOmed
ModelOutside dimensions
(W x D x H)
Inside dimension
(W x D x H)
PUOrder No. Price/Unit/GBP 
INCO108med710 x 550 x 778560 x 400 x 4801087015536030-on demand 
INCO153med630 x 650 x 938480 x 500 x 6401538015536031-on demand 
INCO246med790 x 750 x 938640 x 600 x 64024611015536032-on demand 
Further accessories such as lockable door, FDA-conforming software, User-ID-Card, IQ / OQ on customer request.
Outside dimensions: depth plus 38 mm for door handle, height variable due to adjustable feet.
Inside dimensions: depth less 25 mm for fan.
Accessories for CO2 incubators INCOmed / Memmert
Additional modules CO2 incubators INCOmed / Memmert