+44 (0) 1904 488 599

Welcome, I’m Alex Davis. Yorlab prides itself on its professional but personal approach to customer service and we are committed to ensuring that we can meet all of your laboratory needs – just give us a call on 01904 488599 or 0191 526 0897

Alex Davis, Managing DirectorAlex Davis, Managing Director

Peristaltic Pump Drives MCP-Standard / MCP-Process

Flow rate range from 0.001 to 3700 ml / min (depending on the mounted pump-head).
Pumping and filling in one pump, microprocessor controlled, with ultra-precise speed control and dispensing function. For 1 to 24 pump channels. Speed (2 to 240 min-1) is precisely controlled to 0.1 % and can be programmed using the membrane key-pad and LCD display. A wide variety of dispensing modes delivers highly accurate and reproducible results. With interfaces (RS232) for PC control and foot switch. Can be used for sterile dispensing (up to 135 °C) with suitable tubing material.

Programmable functions:
  • ml / min.
  • Drive speed.
  • Dripfree due to roller backsteps.
  • Calibration of ml / min (flow rate) and ml (volumes).
  • Drive start / stop.

Dispensing by:
  • Volumes ml.
  • Volumes / time unit.
  • Dispensing time (0.1 to 999 h).
  • Interval dispensing by time / volumes with a pause.
  • Supplied without pump-head.
Technical Data:
Dimensions (W x D x H):157 x 260 x 230 mm
Weight:6.9 kg (Process)
6.4 kg (Standard)
Mains supply:230 V / 50 Hz

Additional functions in MCP-Process:

4-program memory for PC-programmed application profiles
dust tight, protected against water jets (IP 65)
programming a number of dispensing cycles
Peristaltic Pump Drives MCP-Standard / MCP-Process  ISMATEC
PUOrder No. Price/Unit/GBP